Air compressor oil use and air compressor fittings oil and water separator principle

  Air compressor is used to control the instrument and automatic device, air compressor oil is used in various types of machinery to reduce the friction, protect the mechanical and processing parts of the liquid lubricant, air compressor oil lubrication, cooling, anti rust, cleaning, sealing and buffering. Do you want to know more about the air compressor oil?

  Air compressor oil use -- a brief introduction to the seven use of air compressor oil

1, anti friction and wear resistance, reduce friction to save energy, reduce wear to extend the mechanical life, improve economic efficiency.

2, cooling, the friction heat is required at any time outside the machine.

3, air compressor oil seal, request for leakage, dust, prevent channeling gas.

4, clean and wash, the friction area is required to remove dirt.

5, anti corrosion and rust, requires the protection of the surface of the friction is not affected by oil metamorphism or external erosion.

6, air pressure oil kinetic energy transfer, hydraulic system and remote control motor and friction.

7, the stress distribution of the buffer, the load and the shock shock and shock absorption, etc.. The current recommendation: natural gas car stalled reasons

  The principle of air compressor parts oil and water separator is: air compressor output of compressed air there will always be a condensate. The amount of condensate depends on the use of air compressor and the use of time, can make 10L or 10000L. oil lubrication air compressor oil content can be as high as 2000mg/L.. The standard limit of the national water resources protection law is that the oil content of the water is less than 20mg/l.